Subdivision

Concept Plan

9-SD-05-C

Recommended for approval
by the Planning Commission

APPROVE variances 1-5 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

DENY variance 6

APPROVE the concept plan subject to 13 conditions


See case notes below

Details

Request

Property Info

Case Notes

What's next?

Details of Action

+
1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Establishing a minimum road grade of 1% for Road B
3. As part of the design plan provide a letter to the Knox County Dept. of Engineering and Public Works from TVA addressing any concerns they may have regarding the location of the proposed entrance road in proximity to their transmission tower.
4. Place the standard note on the design plan reflecting Knox County's requirement for road compaction standards
5. Prior to design plan approval, obtain off-site drainage easements as required by the Knox county Dept. of Engineering and Public Works
6. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept
7. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (0-280-90)
8. Placing a note on the final plat that all lots will have access from the internal street system only
9. Prior to final plat approval establish a homeowners association for the purpose of assessing fees for the maintenance of the detention facility and any other commonly held assets.
10. Certification on the final plat by the applicant's engineer that there is 400' of sight distance in both directions on Fairview Rd..
11. Final approval of the rezoning of this site to PR (Planned Residential) at 3.93 du/ac or greater
12. Meeting all requirements of the approved Use on Review for this site
13. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.

Applicant Request

+
Subdivision
Heritage Hills Subdivision
Lots
45 (Split)
Proposed Density
2.37 du/ac

Variances

1. Road grade variance from 12% to 15% between sta 11+75 and sta 18+50
2. Intersection spacing variance from 400' to 300' from Road A to Napoli Bv.
3. Vertical curve variance from 350' to 300' at sta 11+75 and from 425' to 300' at sta 18+50 of Road A
4. Vertical curve variance from 175.2' to 130' at sta 30+75 of Road C
5. Vertical curve variance from 109.5' to 60' at sta 40+00 and from 457' to 210' at sta 41+75 of Road D
6. Horizontal curve variance from 250' to 150' at sta 11+02 and sta 12+59 of Road A


Property Information

+
Location
South side of Fairview Rd., east of Napoli Bv.

Commission District 8


Size
19 acres

Sector
Northeast County

Currently on the Property
One single family dwelling and vacant land

Growth Plan
Planned Growth Area

Case Notes

+
Staff Recommendation
APPROVE variances 1-5 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

DENY variance 6

APPROVE the concept plan subject to 13 conditions

1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Establishing a minimum road grade of 1% for Road B
3. As part of the design plan provide a letter to the Knox County Dept. of Engineering and Public Works from TVA addressing any concerns they may have regarding the location of the proposed entrance road in proximity to their transmission tower.
4. Place the standard note on the design plan reflecting Knox County's requirement for road compaction standards
5. Prior to design plan approval, obtain off-site drainage easements as required by the Knox county Dept. of Engineering and Public Works
6. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept
7. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (0-280-90)
8. Placing a note on the final plat that all lots will have access from the internal street system only
9. Prior to final plat approval establish a homeowners association for the purpose of assessing fees for the maintenance of the detention facility and any other commonly held assets.
10. Certification on the final plat by the applicant's engineer that there is 400' of sight distance in both directions on Fairview Rd..
11. Final approval of the rezoning of this site to PR (Planned Residential) at 3.93 du/ac or greater
12. Meeting all requirements of the approved Use on Review for this site
13. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.
Disposition Summary
APPROVE variances 1-5 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

DENY variance 6

APPROVE the concept plan subject to 13 conditions

Details of Action
1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Establishing a minimum road grade of 1% for Road B
3. As part of the design plan provide a letter to the Knox County Dept. of Engineering and Public Works from TVA addressing any concerns they may have regarding the location of the proposed entrance road in proximity to their transmission tower.
4. Place the standard note on the design plan reflecting Knox County's requirement for road compaction standards
5. Prior to design plan approval, obtain off-site drainage easements as required by the Knox county Dept. of Engineering and Public Works
6. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept
7. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (0-280-90)
8. Placing a note on the final plat that all lots will have access from the internal street system only
9. Prior to final plat approval establish a homeowners association for the purpose of assessing fees for the maintenance of the detention facility and any other commonly held assets.
10. Certification on the final plat by the applicant's engineer that there is 400' of sight distance in both directions on Fairview Rd..
11. Final approval of the rezoning of this site to PR (Planned Residential) at 3.93 du/ac or greater
12. Meeting all requirements of the approved Use on Review for this site
13. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.

What's next?

+
After the Planning CommissionAppeals of Concept Plans and Final Plats are filed with Chancery CourtThe Process
Applicant

Heritage Hills Subdivision

Heritage Hills Subdivision


Case History