1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County, Ord. 91-1-102
3. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions on Snyder Rd.
4. Place a note on the final that all access from this development will be via the internal road system only
5. Prior to design plan approval, obtain an off-site drainage easement as required by the Knox County Dept. of Engineering and Public Works
6. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff

Staff Recommendation

APPROVE variances 1 and 2 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 6 conditions

---

1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County, Ord. 91-1-102
3. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions on Snyder Rd.
4. Place a note on the final that all access from this development will be via the internal road system only
5. Prior to design plan approval, obtain an off-site drainage easement as required by the Knox County Dept. of Engineering and Public Works
6. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff

---

Disposition Summary

APPROVE variances 1 and 2 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 6 conditions

---

Details of Action

1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County, Ord. 91-1-102
3. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions on Snyder Rd.
4. Place a note on the final that all access from this development will be via the internal road system only
5. Prior to design plan approval, obtain an off-site drainage easement as required by the Knox County Dept. of Engineering and Public Works
6. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff