Subdivision

Concept Plan

11-SG-04-C

Recommended for approval
by the Planning Commission

APPROVE variances 1-10 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 7 conditions


See case notes below

Details

Request

Property Info

Case Notes

What's next?

Details of Action

+
1. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
2. Provision of a street name that is consistent with the Uniform Street Naming and Addressing System within Knox County (Ord. 91-1-102).
3. Meeting all applicable requirements of the Knox County Department of Engineering and Public Works.
4. Certification on the final plat by the applicant's surveyor that there is 300' of sight distance in both directions on Snyder Rd. from the proposed entrance road.
5. Including the sight distance easement across lot 31 on the final plat.
6. Meeting all requirements of the approved use on review development plan.
7. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.

Applicant Request

+
Subdivision
Robins Glen
Lots
47 (Split)
Proposed Density
1.97 du/ac

Variances

1. Road grade variance on Road A between station 2+00 and 7+00, from 12% to 15%.
2. Vertical curve variance Road A at station 0+40, from 225' to 80'.
3. Vertical curve variance Road A at station 12+43, from 300 to 200'.
4. Vertical curve variance Road A at station 16+47.77, from 125' to 80'.
5. Vertical curve variance Road B at station 0+40, from 105' to 80'.
6. Vertical curve variance Road B at station 1+65, from 167.5' to 120'.
7. Vertical curve variance Road B at station 5+39, from 288.25' to 200'.
8. Horizontal curve variance on Road A at station 0+57.36, from 250' to 150'.
9. Horizontal curve variance on Road A at station 2+29.2, from 250' to 200'.
10. Horizontal curve variance on Road A at station 5+80.66, from 250' to 150'.


Property Information

+
Location
North side of Snyder Rd., west of Lovell Rd.

Commission District 6


Size
23.87 acres

Sector
Northwest County

Currently on the Property
Residence

Growth Plan
Planned Growth Area

Case Notes

+
Staff Recommendation
APPROVE variances 1-10 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 7 conditions

1. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
2. Provision of a street name that is consistent with the Uniform Street Naming and Addressing System within Knox County (Ord. 91-1-102).
3. Meeting all applicable requirements of the Knox County Department of Engineering and Public Works.
4. Certification on the final plat by the applicant's surveyor that there is 300' of sight distance in both directions on Snyder Rd. from the proposed entrance road.
5. Including the sight distance easement across lot 31 on the final plat.
6. Meeting all requirements of the approved use on review development plan.
7. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.
Disposition Summary
APPROVE variances 1-10 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 7 conditions

Details of Action
1. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
2. Provision of a street name that is consistent with the Uniform Street Naming and Addressing System within Knox County (Ord. 91-1-102).
3. Meeting all applicable requirements of the Knox County Department of Engineering and Public Works.
4. Certification on the final plat by the applicant's surveyor that there is 300' of sight distance in both directions on Snyder Rd. from the proposed entrance road.
5. Including the sight distance easement across lot 31 on the final plat.
6. Meeting all requirements of the approved use on review development plan.
7. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.

What's next?

+
After the Planning CommissionAppeals of Concept Plans and Final Plats are filed with Chancery CourtThe Process
Applicant

Robins Glen

Fred Long Construction Concepts


Case History